Filter
Top Products
3.3 Menu Map and Status Pages
3-19
1 Software version
This item shows the version and release date of the
printer firmware.
2 Hardware information
This item shows various printer settings for
hardware-related items:
• MP tray paper size and type
• Paper cassette size and type
• Buzzer control
• Host buffer size
• Sleep time timeout time
• Formfeed timeout time
3Memory
This item shows:
• Standard memory in the printer (128 MB)
• Option memory slot status (Slots 1 and 2) in
megabytes
• Total memory in the printer
• Current status of the RAM disk
4 Page information
This item shows the page related items:
• Tone mode, Normal or Fine
• Number of copies, from 1 to 999
• Total page count
5 Installed options
This item shows the options installed in the printer:
• Hard disk
• Option ROM
• Memory card
6 Network status
This item shows the IP address, subnet mask address,
and default gateway address for the network interface
card in the printer.
7Emulation
This item shows all available emulations of the printer.
The PCL 6 emulation is set as default when the printer is
shipped from the factory. The emulations are:
•PCL 6
•KPDL3
•KC-GL
8 Error log
This item shows the last three instances of the following
types of errors, listing them in the order of occurrence:
• KPDL (PostScript) errors
• Memory overflow
• Print overrun
• File-not-found
The most recent error is displayed on the topmost line of
Error Log. Error information is cleared when the printer
is powered off.
The error log information is intended for service
purpose.
9 Consumable status
This item shows the approximate level of remaining
toner. When the value is 100, the toner container is full.
The closer to 0, the smaller the amount of remaining
toner.
10 Interface information
This information shows the emulation and the default
font for all interfaces installed in the printer.