Kyocera C8026N Printer User Manual


 
3.6 Making Default Settings
3-34
3
33
3
Press the ENTER key. A blinking question mark (?)
appears.
4
44
4
Select
KPDL
or
KPDL (AUTO)
using the
U
or
V
key.
5
55
5
Press the ENTER key.
6
66
6
Press the Z key. Press the U or V key until >Print
KPDL Errs (errors) appears.
7
77
7
Press the ENTER key. A blinking question mark (?)
appears.
8
88
8
Select On using the U or V key. Press the ENTER
key.
9
99
9
Press the MENU key. The display returns to Ready.
3.6.5 Default Font
You can select the default font for the current interface. The
default font can be one of the internal fonts or a font that is
downloaded to the printer memory or stored on memory card or
hard disk. The default font of internal fonts is Courier (
I000
).
In this menu, you can also set the type and pitch for Courier
and Letter Gothic; as well as to print a font list.
1
11
1
Press the MENU key.
2
22
2
Press the U
UU
U or V
VV
V key repeatedly until Font >
appears.
3
33
3
Press the Z key. Press the U or V key until >Font
Select > appears.
4
44
4
To select an internal font, make sure that Internal
is displayed and press the Z key. The display changes
as shown below. If Internal is not displayed, press
the ENTER key, then press the U or V key until it
appears.
To select an optional font, press the ENTER key
while >Font Select > is displayed. Press the U
or V key repeatedly until Option appears and then
press the ENTER key. Press the Z key next to display
the font selection shown above. You can perform this
operation only when optional fonts are installed in the
printer.
The letter before the number indicates the location of
the font, as shown below:
5
55
5
Press the ENTER key. A blinking question mark (?)
appears.
6
66
6
Press the U or V key repeatedly until the desired font
number appears. For font numbers of the internal
fonts, see Printing lists of fonts on page 3-36.
7
77
7
When the desired font is displayed, press the ENTER
key.
8
88
8
Press the MENU key. The display returns to Ready.
Emulation
?PCL 6
Emulation
?KPDL
>Print KPDL Errs
Off
>Print KPDL Errs
? Off
Font >
I Internal font
SO Soft (downloaded) font
MO Fonts in optional memory card
HO Fonts in RAM disk or optional hard disk (HD-10)
>Font Select >
Internal
>> I000
>>?I000