Filter
Top Products
3.13 Other Modes
3-58
3.13 Other Modes
The following modes can be accessed in the Others
submenu:
• Message Language
• Automatic Form Feed Timeout Setting
• Sleep Timer Setting
• Received Data Dumping
• Printer Resetting
• Resource Protection
• Alarm (Buzzer) Setting
• Auto Continue Setting
• Duplex Printing Error Detection Setting
• Staple Error Detection Setting
• Punch Error Detection Setting
• Color/Monochrome Print Setting
• Color Registration
• Service Menu (for service personnel)
• Color Calibration
• Using High Density Mode
3.13.1 Selecting the Message Language
You can select the language of the messages on the message
display by following the procedure given below
. You can
optionally download messages in other languages. Contact
your Kyocera Mita dealer for information.
1
11
1
Press the MENU key.
2
22
2
Press the U or V key repeatedly until Others >
appears.
3
33
3
Press the Z key.
4
44
4
Press the U or V key repeatedly until >
MSG
Language
appears. The default message language
is English.
5
55
5
To change the language, press the ENTER key. A
blinking question mark (?) appears.
6
66
6
Press the U or V key. The display cycles through the
available selection in the following order:
English
Francais
Deutsch
Italiano
Nederlands
Español
Português
7
77
7
Press the ENTER key.
8
88
8
Press the MENU key. The display returns to
Ready
.
3.13.2 Automatic Form Feed Timeout
Setting
If the printer receives no data for a certain period, it will time
out and release the current interface. It prints whatever data it
has in its buffer and feeds out the page. The default form feed
timeout time is 0 seconds. The printer does not timeout with
the value set to 0. You can adjust the time-out time as follows:
1
11
1
Press the MENU key.
2
22
2
Press the U or V key repeatedly until Others >
appears.
3
33
3
Press the Z key.
4
44
4
Press the U or V key repeatedly until >Form Feed
Time Out appears.
Others >
>MSG Language
English
>MSG Language
? English
Others >
>Form Feed
Time Out 000sec.