Filter
Top Products
5. Update the server configuration (see “Updating the server configuration” on page 175).
6. Slide the server back into the rack, if necessary.
7. Turn on the peripheral devices and the server.
Connecting the cables
The following illustration shows the locations of the input and output connectors on the front of the
server.
1 Power-on LED 6 System-error LED
2 Power-control button 7 USB 1 connector
3 Reset button 8 USB 2 connector
4 Hard disk drive activity LED 9 Hard disk drive activity LED (green)
5 Locator LED 10 Hard disk drive status LED (amber)
174 ThinkServer ThinkServer RS210, Types 6531, 6532, 6533, and 6534: Hardware Maintenance Manual