Filter
Top Products
1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all
power cords from electrical outlets and disconnect all cables that are connected to the server.
2. Press the blue button 1 to open the side door.
Note: If you have locked the side door, you must turn off the server, disconnect all power cords, and
remove the server cover when you want to remove, install, or replace any hard disk drives. See “Locking
or unlocking the hard disk drive side door” on page 46 and “Removing the server cover” on page 43.
Figure 39. Opening the side door
Chapter 5. Replacing FRUs 69