Filter
Top Products
COMMAND REFERENCE
04_06 LDX-3232 37
CHAPTER 4
Name Parameters Function
LAS:LIM:I2 1 Used to set the LASER low range current source limit
LAS:LIM:I2? NONE Used to return the LASER low range current source limit
LAS:LIM:I4 1 Used to set the LASER high range current source limit
LAS:LIM:I4? NONE Used to return the LASER high range current source
limit
LAS:LIM:MDP 1 Used to set the constant optical power (from monitor
photodiode) limit value
LAS:LIM:MDP? NONE Used to return the optical power (from monitor
photodiode) limit value
LAS:LIM:V 1 Used to set the LASER compliance voltage limit value
LAS:LIM:V? NONE Used to return the LASER compliance voltage limit
value
LAS:MDI 1 Used to set the constant optical power setpoint, if
photodiode responsivity is 0
LAS:MDI? NONE Used to return the monitor photodiode current
measured value
LAS:MDLN 1 Used to enable/disable the front panel modulation input
LAS:MDLN? NONE Used to return the status of the front panel modulation
input
LAS:MDP 1 Used to set the constant optical power setpoint
LAS:MDP? NONE Returns the actual monitor photodiode power value
LAS:MODE? NONE Returns the mode, I (current), IHBW (high bandwidth),
or P (optical power)
LAS:MODE:IHBW NONE Sets the mode to constant current, high bandwidth
LAS:MODE:ILBW NONE Sets the mode to constant current, low bandwidth
LAS:MODE:MDP NONE Sets the mode to constant optical power mode
LAS:OUT 1 Used to enable/disable the current source output
LAS:OUT? NONE Returns the current source output status
LAS:RAN 1 Sets the laser current output range
LAS:RAN? NONE Returns the laser current output range
LAS:SET:LDI? NONE Returns the laser constant I (current) setpoint
LAS:SET:MDI? NONE Returns the laser constant optical power setpoint
LAS:SET:MDP? NONE Returns the constant P (optical power) setpoint
LAS:STEP 1 Used to set the LASER setpoint step value
LAS:STEP? NONE Returns the LASER setpoint step value
LAS:TOL 2 Used to set the LASER setpoint tolerance value and
time period value