Filter
Top Products
COMMAND REFERENCE
LDX-3232 Device-Dependent Command Reference
64 LDX-3232
CHAPTER 4
The LASer:LIMit:I2 command sets the LASER current limit value for the 2000 mA range
on the LDX-3232.
Syntax Diagram
Parameters An <nrf value> that represents the LASER limit current, in mA.
Notes The current limit is in effect in all modes of operation (ILBW, IHBW, or P). The current
limit in use depends on the LASER output range selection.
Examples "LAS:LIM:I2 180" -action: the LASER current limit is set to 180 mA.
":Laser:Limit:I2 160" -action: the LASER current limit is set to 160 mA.
The LASer:LIMit:I2? query returns the value of the LASER current limit for the 2000 mA
range on the LDX-3232.
Syntax Diagram
- where the response is the current limit value for the 2000 mA range.
Notes The current limit is in effect in all modes of operation (ILBW, IHBW, or P). The current
limit in use depends on the LASER output range selection.
Examples "LAS:LIM:I2?" -response: 40, means the laser current limit is 40 mA.
"Laser:LIM:I2?" -response: 50, means the laser current limit is 50 mA .
LASer:LIMit:I2
FRONT PANEL
REMOTE
LASer:LIMit:I2?
FRONT PANEL
REMOTE
:
LAS
<white
space>
<nrf
value>
:
LIM
:
I2
:
LAS
:
LIM
I2
:
?