Filter
Top Products
COMMAND REFERENCE
LDX-3232 Device-Dependent Command Reference
04_06 LDX-3232 71
CHAPTER 4
The LASer:MODE? query returns the selected laser control mode.
Notes I
HBW
mode is the same as I mode (low bandwidth), except that the output low bandpass
filter is disabled in I
HBW
mode.
Examples "LAS:MODE?" -response: ILBW, means that constant I (current) mode is in effect for the
laser output.
":Las:Mode?" -response: MDP, means that constant P (power) mode is in effect for the
laser output, and CALMD>0.
"Las:Mode?" -response: MDI, means that constant P (power) mode is in effect for the
laser output, and CALMD=0.
"Laser:MODE?" -response: IHBW, means that constant I
HBW
(current, high bandwidth)
mode is in effect for the laser output.
The LASer:MODE:IHBW command selects laser high bandwidth constant current mode.
Parameters None
Notes This mode of operation is constant I mode with the output lowpass filter disabled.
Examples "LAS:Mode:Ihbw" -action: enables the laser high bandwidth constant current mode.
LASer:MODE?
FRONT PANEL
REMOTE
LASer:MODE:IHBW
FRONT PANEL
REMOTE
:
LAS
:
?
MODE
:
LAS
: :
MODE
IHBW