Filter
Top Products
COMMAND REFERENCE
LDX-3232 Device-Dependent Command Reference
48 LDX-3232
CHAPTER 4
The LASer:DISplay command enables or disables (turns off) the display and some LEDs
Syntax Diagram
Parameters An <nrf value>; -where 1 = on, 0 = off.
Notes Turning the display and LEDs off means that a message of all blank spaces is sent to the
display, and most of the LEDs will be turned off.
Examples "las:dis 1" -action: turns the LASER display on and enables the LASER indicator LEDs.
"Laser:dis Off" -action: turns the LASER display and disables the LASER indicator
LEDs.
The LASer:DISplay? query returns the value shown on the display.
Syntax Diagram
Notes Returns the actual (6-character) string from the output buffer to the display. If the display
is disabled, it returns " .".
Examples "LAS:DIS?" -response: "- 99.9", means the LASER display shows "- 99.9".
"Laser:DISp?" -response: " 0.6", means the LASER display shows " 0.6".
LASer:DISplay
FRONT PANEL
REMOTE
LASer:DISplay?
FRONT PANEL
REMOTE
<white
space>
<nrf
value>
:
:
LAS DIS
:
LAS DIS
:
?