Filter
Top Products
COMMAND REFERENCE
LDX-3232 Device-Dependent Command Reference
72 LDX-3232
CHAPTER 4
The LASer:MODE:ILBW command selects laser constant current mode.
Parameters None
Notes Constant I mode (low bandwidth) enables the output low bandpass filter.
Examples "LAS:MODE:ILBW" -action: sets the laser output for constant I mode (low bandwidth).
The LASer:MODE:MDP command selects laser constant power mode.
Parameters None
Notes This mode of laser operation requires the laser's monitor photodiode feedback to
maintain constant optical power or constant monitor current.
In this mode, the displayed parameter will be either I
PD
(if CALMD=0) in µA, or P
PD
(if
CALMD>0) in mW.
Examples "LAS:MODE:MDP" -action: sets the laser output mode of operation to constant optical
power mode.
LASer:MODE:ILBW
FRONT PANEL
REMOTE
LASer:MODE:MDP
FRONT PANEL
REMOTE
:
LAS
: :
MODE
I
ILBW
:
LAS
: :
MODE
P
MDP