Filter
Top Products
COMMAND REFERENCE
LDX-3232 Device-Dependent Command Reference
04_06 LDX-3232 49
CHAPTER 4
The LASer:DISplay:LDI command sets the laser display to show the constant current
measurement.
Syntax Diagram
Parameters None.
Notes The LDI measurement display mode is turned off automatically when another display
selection is enabled.
Examples "LAS:DIS:LDI" -action: enables the display for current values.
The LASer:DISplay:LDI? query returns the status of the LDI measurement display mode.
Syntax Diagram
- where the response is 0 or 1.
Notes In local operation, the status of the LDI measurement display mode is indicated by the
enunciator next to the display (mA will be illuminated and not blinking when the display is
in LDI measurement mode).
Examples "LAS:DIS:LDI?" -response: 0, means that the LDI measurement is not displayed.
"Las:dis:ldI?" -response: 1, means that the LDI measurement is displayed.
LASer:DISplay:LDI
FRONT PANEL
REMOTE
LASer:DISplay:LDI?
FRONT PANEL
REMOTE
:
LAS
: :
DIS
I
LDI
:
LAS
:
DIS
I
:
?
LDI