Minolta 0990-7701-02 Printer User Manual


 
5
CHAPTER 1
Installation
- When the Third Cassette Unit is installed, remove it from the
printer and carry the printer.
- Since the printer weighs approximately 35kg (77-1/4 lbs.),
two people are required to lift it.
- If you need to transport the printer over a long distance, consult your
Technical Representative.
Observe the following precautions when moving the printer.
Moving the Printer
light.
Whenever the Drum Cartridge has been removed from the printer, immediately wrap it in a cloth to protect it from
NOTE
- Avoid storing the supplies at any of the following places:
A place subject to direct sunlight. (The Drum Cartridge should not be exposed to fluorescent light, either.)
A hot place with an open flame.
A humid place.
A dusty place.
- Store paper, which has been removed from its wrapper but not loaded in the printer tray, in a sealed plastic bag in a cool,
dark place.
- Use only the Toner Cartridge and toner for the exclusive use of this printer.
- Keep supplies out of the reach of children.
- If your hands become soiled with toner, wash them with soap and water immediately.
Use the following precautions when handling the printer supplies (Toner Cartridge, Drum Cartridge, and paper).
Care of Printer Supplies
NOTE
normalement. Cependant, use odeur désagréable pent être ressentie dans les pièces dont l’ aération est insuffisante et
lorsque une utilisation prolongée du imprimante est effectuée. Pour avoir la certitude de travailler dans un environnement
das conditions de confort, anté et sécurité, il est préférable de bien aérer la pièce ou se trouve le imprimante.
REMARQUE
= Placer le imprimante dans une pièce largement ventilée =
Unequantité d’ ozone négligable est dégagée pendant le fonctionnement du imprimante quand celui-ci est utilisé
= Locate the printer in a Well Ventilated Room =
A negligible amount of ozone is generated during normal operation of this printer. An unpleasant odor may, however, be
created in poorly ventilated rooms during extensive printer operations. For a comfortable, healthy, and safe operating
environment, it is recommended that the room be well ventilated.
NOTE
2. Preparation for Installation
NOTE
REMARQUE
Grips