Filter
Top Products
18
Œ
CHAPTER 2
Using the Printer
1. Printer Parts and Accessories
Power Switch
Use to turn the printer ON and OFF
☞
p. 23
Print Tray
The printed paper is fed out face down onto
this tray. The tray can hold 250 sheets
of printed paper.
☞
p. 34
Front Cover Lock Release Lever
Pull down to unlock the Front Cover.
Front Cover
Swing open to change supplies such as the Toner Cartridge or to clear
a paper misfeed.
TRAY 2 (250-Sheet Second Cassette)
Holds up to 250 sheets of paper.
☞
p. 24
TRAY 3 (250-Sheet Third Cassette: Option)
Holds up to 250 sheets of paper.
☞
p. 24
250-Sheet Third Cassette Unit (Option)
When installed under the Printer, houses a third cassette increasing paper capacity to 650 sheets.
Grips
- Two grips are provided on each side of the printer (four in all). Used to hold the printer when installing or moving it.
- The printer should be lifted by two persons.
☞
p. 5
Power Cord Socket
Connect the power cord of the printer to this socket.
Interface Connector (Serial Connector)
Provides connection between the printer and host computer.
☞
p. 8
Rear Cover Lock Release Lever
Pull down to swing open the Rear Cover.
Rear Cover
Swing open to change the Oil Roller Assembly or clear a paper
misfeed.
Control Panel
-Allows the operator to make various settings.
-The LCD Display shows the current status of the printer.
For more details, see “Control Panel Keys.”
☞
p. 20
Interface Connector (Parallel Connector)
Provides connection between the printer and host computer.
☞
p. 8
TRAY 1 (Multi Purpose Tray)
- Swing open toward you to load paper
.
- Holds up to 150 sheets of paper.
☞
p. 24
PRINTER
Network Board Panel
-
Use to mount the optional network board.
☞
p. 14