Filter
Top Products
80
Œ
Troubleshooting
CHAPTER 5
ATTENTION
The Fusing Unit inside the Rear Cover can become very hot during operation. Do not touch the area as it
may cause a burn.
When a paper misfeed occurs in the printer, remove the paper according to the following procedure.
CHAPTER 2
1
2
NOTE
- The Fusing Unit is hot. Be careful not to touch the
area carrying the WARNING! HIGH
TEMPERATURE label.
4
5
- Open the Rear Cover.
- Push and hold the Fusing Unit Lock Release Lever
Button and slide out the Fusing Unit.
- Pull out the paper misfed in the Paper Exit Port
toward you.
6
- While turning the Misfeed Clearing Dial of the Fusing
Unit counterclockwise, pull out the paper misfed in
the Fusing Unit.
3
- Pull down the paper misfed in the Paper Exit Port
When a Paper Misfeed has Occurred
2. A Problem Exists in the Preparation Stage and During a Print Cycle
Button of the Fusing Unit
Lock Release Lever
WARNING! HIGH
TEMPERATURE
label
Misfeed
Clearing Dial