Filter
Top Products
76
Œ
Troubleshooting
CHAPTER 5
LCD Message Description Action
WARMING UP
The Printer is warming up. Wait for a short while.
OFF LINE
Printer cannot receive data from
Host computer.
Press the On Line key to set the printer into the
On Line state.
PROCESSING
- Receiving data from the host
computer.
- The printer is making a print
image.
Wait for a while.
DATA COMPRESSION
Compressing data from the host
computer
Wait for a while.
TRAY X PAPER LOW
Tray2 or Tray3 is almost out of
paper.
Ready paper for addition.
LOAD XXX
TRAY X
The specified paper doesn’t exist in
the specified cassette.
Change the paper in the cassette for paper of the
specified size.
☞
p.24
Printing will continue with the currently available
paper if the Proceed key is pressed or an Auto-
continue Time-out occurs.
LOAD XXX
IN MANUAL
Print Menu is set to Manual Feed.
☞
p. 41
Load the paper of the specified size in the Tray 1
(multipurpose tray). Then, press the Proceed key.
This prints one page.
TRAY X EMPTY
Tray1, Tray2 or Tray3 is paper
empty.
Add paper.
☞
p. 26
TONER LOW XXXXX
The toner is low but still can print. Ready a new Toner Cartridge for replacement.
TONER EMPTY
XXXXX
The toner is empty.
Each Press of the Proceed key will allow one
print.
You can still make print, but the image density will
become lighter and lighter. It is recommended therefore
that you change the Toner Cartridge as soon as possible.
☞
p. 48
Change the Toner Cartridge.
☞
p. 48
PLEASE WAIT
XXXXX
The Toner Cartridge is being
moved into the replacement posi-
tion.
Wait for a moment.
DRUM ALMOST USED
The drum cartridge is nearing the
end of its reliable life.
The Drum Cartridge, Waste Bottle, and Oiling
Roller have the same replacement frequency.
Ready a new Cartridge for replacement.
REPLACE
DRUM UNIT
The life-time of the drum cartridge
has expired.
The Drum Cartridge, Waste Bottle, and Oiling
Roller have the same replacement frequency.
Change all three of these units for new ones.
☞
p. 56
REPLACE
WASTE BOTTLE
The Waste Bottle is full.
2. A Problem Exists in the Preparation Stage and During a Print Cycle
When a Message Appears