Filter
Top Products
58
Œ
Maintaining Your Printer
CHAPTER 4
16
- Gently close the Front Cover.
Do not close it violently, because a printer breakdown
could result.
- You will hear the sound of the printer operating.
14
1. Changing Cartridges
12
- Install the Waste Bottle by inserting its
guide into the printer's rail.
0990U104
Waste Bottle
guide
Printer’s rail
Green Label
- Press down on the top face of the Waste Bottle.
- The Bottle clicks into place when it is installed
correctly.
- Make sure that the Hook of the Waste Bottle is engaged
securely with the pins of the Image Transfer Belt Unit.
13
Hook
Pins
- Make sure that the Shutter at the toner exit of the
Image Transfer Belt Unit is open securely.
To start printing with the Shutter closed will lead to
internal contamination, a decline in print quality
and/ or a failure.
NOTE
15
- Open the Rear Cover.
17
- Push and hold the button of the Fusing Unit Lock
Release Lever, and pull out the Fusing Unit.
18
NG (closed)
OK (open)
Toner Collecting
Bottle
Image Transfer
Belt Unit
Shutter
Button of the Fusing Unit
Lock Release Lever