Filter
Top Products
23
Installation
CHAPTER 2
Using the Printer
NOTE
- If no print commands are sent from the host computer to the printer for
15
min., the printer automatically enters standby in the
Power save mode
.
- You can set the time it takes to enter the
Power save mode
, or turn the mode
OFF (no power save)
through the
CONFIG MENU
. For details, see
Chapter 3 “Changing the Printer Settings”
.
☞
p. 35
The printer will be ready to make a print approx. 90
sec. after the Power Switch is turned ON.
When Printer is Turned ON
Turning Printer OFF
Press the Power Switch to the (OFF) position.
Turning Printer ON
Press the Power Switch to the
❙
(ON) position.
2. Turning ON and OFF the Printer
Turning Printer ON
Turning Printer OFF
When Printer is Turned ON
NOTE