Filter
Top Products
68
Œ
Maintaining Your Printer
CHAPTER 4
15
- Check that the connector from the Image Transfer Belt
Unit is positively connected to the connector on the
printer end.
14
16
17
- Install the Waste Bottle by inserting its guide into the
printer's rail.
0990U104
Waste Bottle
guide
Printer’s rail
Green Label
19
- Press down on the top face of the Waste Bottle.
- The Bottle clicks into place when it is installed
correctly.
- Make sure that the Hook of the Waste Bottle is engaged
securely with the pins of the Image Transfer Belt Unit.
18
Hook
Pins
- Make sure that the Shutter at the toner exit of the
Image Transfer Belt Unit is open securely.
To start printing with the Shutter closed will lead to
internal contamination, a decline in print quality
and/or a failure.
NOTE
1. Changing Cartridges
NG(closed)
OK(open)
Toner Collecting
Bottle
Image Transfer
Belt Unit
Shutter