Filter
Top Products
12
Press button to select INPUT menu.
Press button.
INPUT menu is displayed. Set the monitor polarity with “IN SYNC” on
this menu.
Press or button to select “IN SYNC”.
The sync. signal level being selected, for example, “ttl” is displayed.
Set the sync. signal level according to the equipment to
beconnected. Press or button to select “ttl”, “sog”
or “0.3v”.
ttl Inputs the TTL level sync signal.
sog Inputs the Sync. On Green level sync signal.
0.3v Inputs the 0.3Vp-p level sync signal.
Press SET button.
The function is set, and SERVICE MENU is displayed.
Press or button to select OUTPUT menu.
Press button.
OUTPUT menu is displayed. Set the signal output with “OUT SYNC” and
“RGB SOG” on this menu.
Press or button to select first “OUT SYNC” . Press
or button to select “auto” or “user”.
The sync. signal setting being selected, for example, “auto” is displayed.
auto Outputs the same sync signal as IN SYNC setting.
user Sets the signal output.
When setting “user” on , select second “OUT SYNC,”
and set the sync.signal level according to the equipment
to be connected. Press or button to select “0.3v”
or “ttl.”
0.3v Outputs the 0.3Vp-p sync signal.
ttl Outputs the TTL level sync signal.
Press or button to select third “OUT SYNC”.
Set the monitor’s polarity according to the equipment
to be connected. Press or button to select “nega”
or “posi.”
CONNECTIONS