Filter
Top Products
22
PRINTING (BASIC)
BEFORE PRINTING
SELECTING FIELD/FRAME
Press FIELD/FRAME button on the remote control unit to select
“FIELD” or “FRAME”.
• Select “FRAME” for a high resolution still image printing.
Select “FIELD” for a picture of quickly moving objects.
• When “FIELD” is selected, the print image will be lower in resolution.
The selected mode is displayed on the monitor screen and LCD of this unit.
• A video picture is normally composed of two slightly lower resolution images (FIELD
images) to form a single image (FRAME image).
SELECTING INPUT SIGNAL
• Select VIDEO, S-VIDEO or RGB according to the input signal.
• The appropriate input signal may already be selected through the RS-232C control
software.
• The input signal can be set on the menu displayed on the monitor screen and LCD.
• Unless the input signal is changed, it is not necessary to select the input signal every
time.
Press MENU button.
MAIN MENU is displayed.
Press , button to select “INPUT”.
Press , button to select “VIDEO”, “S-VIDEO”, or “RGB”.
Press SET button.
• “SAVE PRG 1/2/3/CANCEL” is selected.
• This menu let you select a program memory (1-3) to store your new settings.
PROG.
MENU
CLEAR STOP
SET
COLOR FIELD
ADJUST /FRAME
DISPLAY
PRINT
Q' ty
-
PRG. 1 Q'ty 1
S-VIDEO [ABC]FRAME LIVE
MAIN MENU
INPUT VIDEO / S-VIDEO / RGB
COLOR ADJ
LAYOUT
PRINT
COMMENT
MEMORY POSITION
SAVE PRG 1/2/3/CANCEL
MAIN MENU
INPUT VIDEO / S-VIDEO / RGB
COLOR ADJ
LAYOUT
PRINT
COMMENT
MEMORY POSITION
SAVE PRG 1/2/3/CANCEL
MAIN MENU
INPUT VIDEO / S-VIDEO / RGB
COLOR ADJ
LAYOUT
PRINT
COMMENT
MEMORY POSITION
SAVE PRG 1/2/3/CANCEL
MAIN MENU
INPUT VIDEO / S-VIDEO / RGB
COLOR ADJ
LAYOUT
PRINT
COMMENT
MEMORY POSITION
SAVE PRG 1/2/3/CANCEL