Filter
Top Products
45
CONNECTIONS
PRINTING
PRECAUTIONS FEATURES
PREPARATION
OTHERS
TROUBLE-
SHOOTING
ADJUSTMENTS
ADJUSTMENTS & SETTINGS (SERVICE MENU)
SERVICE MENU ITEMS
SYSTEM Sets page increment, buzzer and remaining of ink sheet, selects
thermal paper.
GAMMA ADJ Sets gamma curve level.
LAYOUT2 Adjusts print layout setting.
ANALOG COLOR ADJ Adjusts analog input signal image.
INPUT Sets even/odd number of FIELD, adjusts display, input signals, etc.
OUTPUT Sets sub-contrast of the monitor, sync. signal.
KEY SET Selects the functions of the buttons and function of remote
terminal.
RS232C Selects baud rate.
REMOTE Selects remote signal.
PREVIOUS ERROR Shows error history.
SAVE PRG Stores the above settings in 1 of 3 program memories
SERVICE MENU
SYSTEM
GAMMA ADJ
LAYOUT 2
ANALOG COLOR ADJ
INPUT
OUTPUT
KEY SET
RS232C
REMOTE
PREVIOUS ERROR
SAVE PRG 1/2/3/CANCEL
SYSTEM SETUP
INCREMENT OFF/PART/PAGE
BUZZER OFF/T1/T2
REMAINING Q'ty 10
REMAIN NOTICE OFF/BZ/PRN/B&P
REMAINING SCREEN OFF/ON
ERROR SCREEN OFF/ON
AUTO FEED&CUT OFF/ON
THERMAL OFF/ON
PAPER HOLD OFF/ON
INIT PROG ALL/MAIN/SERVICE
INITIALIZE OFF/GO[SET]
(EXAMPLE) Selecting SYSTEM SETUP display
SERVICE MENU
SYSTEM
GAMMA ADJ
LAYOUT 2
ANALOG COLOR ADJ
INPUT
OUTPUT
KEY SET
RS232C
REMOTE
PREVIOUS ERROR
SAVE PRG 1/2/3/CANCEL
OPERATING SERVICE MENU
Press MENU button on the remote control unit.
MAIN MENU is displayed.
Press STOP buttons on the remote control unit at the same time.
SERVICE MENU is displayed.
Select your desired item by pressing or on the remote control
unit.
Press button to open a sub menu.
Select an item you wish to adjust by pressing or .
Press or button to select an item or change value.
Press SET button.
SERVICE MENU is displayed.
“SAVE PRG 1/2/3/CANCEL” is selected.
This menu lets you select a program memory (1-3) to store your new settings.
Press or button to select the program memory numbers of
1, 2 or 3 to store the setting.
The program is replaced. In case of keeping the stored program, do not select the
program memory number in which the setting is stored.
If you wish to cancel the setting, select “CANCEL”.
Press SET button.
When selecting PRG1 to set, “1” is chosen. When memorizing in a different program
memory number, select the number of the program.
The setting is completed and the normal screen is displayed.
MENU
CLEAR STOP
SET
PRINT
Q' ty
-