40
COLOR ADJ Colour adjustment display
• The colour of the source image and memorized image can be adjusted.
SELECT Selects colour print or black and white print.
COLOR Colour print
B&W Black and white print (The monitor shows in colours.)
BRT(Bright) Adjusts brightness of the printing image. (The whole image will be
adjusted.)
CONT (Contrast) Adjusts contrast of the printing image. (The image will be adjusted
based on the black level.)
R-SUB Adjusts red-subcontrast of the printing image. Red is added with
and blue is added with .
G-SUB Adjusts green-subcontrast of the printing image. Green is added
with and pink is added with .
B-SUB Adjusts blue-subcontrast of the printing image. Blue is added with
and yellow is added with .
CENTER When pressing , the values of BRT, CONT, R-SUB G-SUB and
B-SUB will be reset to 0.
CANCEL
Cancels the change of COLOR ADJ and resets to the stored setting.
• When selecting B&W, R-SUB, G-SUB and B-SUB change to Y-SUB, M-SUB,
C-SUB. When selecting THERMAL : OFF (colour print), each value of Y-SUB, M-
SUB and C-SUB is available to adjust the colour of the printed image. When
selecting THERMAL : ON (thermal print), only Y-SUB value is available and
function as the density of gray colour of the printed image.
• When SELECT is changed from COLOR to B&W, the set values of R-SUB, G-
SUB and B-SUB function as the density of gray colour.
ADJUSTMENTS & SETTINGS (MAIN MENU)
COLOR ADJ
SELECT COLOR/B&W
BRT : 0
CONT : 0
R-SUB : 0 C R
G-SUB : 0 M G
B-SUB : 0 Y B
CENTER
CANCEL
LAYOUT
MODE AUTO/S
MULTI
OFF/OFF(PRN SELECT)/ON
MODE SAME/DIFF/PHOTO1
IMAGES
2/2S/4/16
SIZE W/M/N/USER
<COPY OFF/W/M/N>
<TOP 0 (0~ -48)>
<BOTTOM 0 (0~ -48)>
<LEFT 0 (0~ -63)>
<RIGHT 0 (0~ -63)>
LAYOUT Layout setting display
MODE Selects the print size. Normally select the ink sheet size which is
installed in this unit. (See page 17 for the print paper.)
AUTO L size ink sheet.
When S size ink sheet is installed, S size is automatically set.
S S size ink sheet or S size printing with L size ink sheet, and S size
printing with thermal paper.
L L size printing with thermal paper.
• When using thermal paper (selecting THERMAL : ON in SYSTEM SETUP menu),
AUTO/S is changed to L/S.
MULTI Selects ON or OFF for printing 2, 4, or 16 images on a sheet.
OFF Multi-image print is not available. 1 image mode
OFF(PRN SELECT)
4 memory pages display. 1 image mode.
ON Multi-image print is available.
• When selecting OFF or OFF(PRN SELECT), MODE: SAME/DIFF/PHOTO1 and
IMAGES : 2/2S/4/16 are not displayed.
• OFF(PRN SELECT) is not available for RS-232C equipment.
• When setting AUTO CLEAR to MEM or AFTER PRN in OFF(PRN SELECT), only
selecting page is cleared.