Filter
Top Products
46
ADJUSTMENTS & SETTINGS (SERVICE MENU)
SYSTEM SETUP
INCREMENT OFF/PART/PAGE
BUZZER OFF/T1/T2
REMAINING Q'ty 10
REMAIN NOTICE OFF/BZ/PRN/B&P
REMAINING SCREEN OFF/ON
ERROR SCREEN OFF/ON
AUTO FEED&CUT OFF/ON
THERMAL OFF/ON
PAPER HOLD OFF/ON
INIT PROG ALL/MAIN/SERVICE
INITIALIZE OFF/GO[SET]
SYSTEM SETUP System setting display
INCREMENT
OFF Page increment is not available.
PART Every time pressing MEMORY button, memory part goes to the
next part and image will be memorized on it. The memory page
does not go to the next. When MULTI:OFF, this mode works and
same as PAGE mode.
PAGE Every time pressing MEMORY button, memory page goes to the
next page and image will be memorized on it.
BUZZER Selects the buzzer sound when pressing the buttons on the VCP
and remote control unit.
OFF Does not sound the buzzer.
T1 Sounds the buzzer (Tone1).
T2 Sounds the buzzer (Tone2).
REMAINING Q’ty Sets the number of ink sheet to inform the remaining.
0 ~20 Informs by setting of REMAIN NOTICE when 0 to 20 ink sheet are
left.
REMAIN NOTICE Selects the way to inform when the number of ink sheet is less
than the set number in REMAINING Q’ty.
OFF Does not inform the remaining.
BZ The buzzer sounds three times when turning on the power,
completing printing and closing the door. If the door is open when
turning on the power, the buzzer sounds when closing the door.
PRN Informs by printing a red mark under the comment area on the
print.
B&P The buzzer sounds three times and a red mark is printed under
the comment area on the print.
• When selecting SELECT : B&W in COLOR ADJ, the red mark is printed in black-
and-white.
REMAINING SCREEN Selects displaying the remains of ink sheet on the monitor
or not.
OFF Does not display the remains of ink sheet on the monitor.
ON Displays the remains of ink sheet on the monitor.
• If a paper jam occurs, the remains of the ink sheet may be different from the
indication on the monitor.
NOTE
When THERMAL is set to ON, REMAINING Q’ty, REMAIN NOTICE and REMAINING
SCREEN are not displayed.
ERROR SCREEN Selects displaying the error on the monitor.
OFF When DISPLAY off is selected, the error is not displayed on the
montor.
ON Even if DISPLAY off is selected, the error is displayed on the
montor.
AUTO FEED&CUT Selects automatically feeding and cutting the print paper or not.
OFF Does not feed and cut the print paper.
ON When power is on and setting the print paper, this unit
automatically feeds and cuts it twice after closing the front door.
• Only OFF is displayed when selecting THERMAL : ON.
THERMAL Selects the type of printing paper.
OFF Colour print paper.
ON Monochrome thermal paper.
• The image may not be printed correctly depending on the set of actual paper
type, installation of ink sheet and condition of selecting menu. (Refer to the next
page.)
• When using thermal paper, do not install the ink cassette.