Filter
Top Products
Chapter 3: Web Management Interface
Multi-Tech Systems, Inc. FF240-IP Admin User Guide 42
SIP
Transport Protocol
SIP call setup messages are transmitted using UDP. There is currently no option for TCP.
SIP Proxy/Gateway
This displays the IP address of the SIP device the FF240-IP will communicate with when sending faxes.
This could be a SIP proxy, SIP Gateway or IP PBX.
SIP Domain
Enter the SIP domain into the box if necessary.
Authorization Required
Check this if the SIP proxy or the registrar the FF240-IP is communicating with requires authentication.
Username
Enter the Username if you checked the “Authorization Required” box.
Password
Enter the Password if you checked the “Authorization Required” box.
Confirm Password
Re-enter the authorization Password.
Local Port
Enter the local port used for SIP. Default is 5060.
SIP Proxy Port
Enter the SIP Proxy port if necessary. Default is 5060.
User Registrar
Check this box if the FF240-IP needs to use a registrar for SIP call routing.
Registrar
Enter the SIP registrar IP address.
Registrar Port
Enter the registrar port if necessary. Default is 5060.
Expires
Enter the registrar expiration time in seconds. Default is 3900 seconds.