Filter
Top Products
107
Chapter 8 - LAN Client Settings
Multi-Tech Systems, Inc. RouteFinder RF802EW User Guide
Accessing a Windows NT Server and a Novell NetWare Server
Note: Before configuring your remote site, ensure TCP/IP has been installed on your NT
Server.
Perform the following procedures if your PC workstation needs to access both a Windows NT Server
and a Novel NetWare Server.
Adding the dial-up adapter (Novell/NT Server Connection)
Windows 95/98/NT:
1. Click Start | Settings | Control Panel.
2. Double-click the Network icon to open the Network dialog box.
3. Click Add. The Select Network Component Type dialog box opens.
4. Select Adapter, then click Add. The Select Network adapters dialog box opens.
5. (Win95/98 only) In the Manufacturers list, select Microsoft. In the Network
Adapters list select Dial-up adapter.
Note: In Windows NT workstation there is no Manufacturers list.
6. Click OK twice to return to, and then close, the Network dialog box.
Adding TCP/IP (Novell/NT Server Connection)
Windows 95/98/NT:
1. In the Network dialog box, Configuration tab, click Add.
2. Select Protocol and click Add.
3. The Select Network Protocol dialog box is displayed. In the Manufacturers list
[Win95 only], select Microsoft. In the Network Protocols list, select TCP/IP
[Win95/98] or TCP/IP Protocol [WinNT only].
Note: Windows NT workstation has no Manufacturers list.
4. Click OK twice to return to, and then close, the Network dialog box.
Adding Client for Microsoft Networks (Novell/NT Server Connection)
Windows 95/98:
1. In the Network dialog box, Configuration tab, click Add.
2. Select Network Client and click Add.
3. The Select Network Client dialog box displays. In the Manufacturers list, select
Microsoft. In the Network Clients list, select Client for Microsoft Networks.
4. Click OK to add this Client and return to the Network dialog box.