Filter
Top Products
30
Chapter 4 - Web Browser Configuration and Management
Multi-Tech Systems, Inc. RouteFinder RF802EW User Guide
Setup Wizard - ISP Additional Settings (PPPoE Settings)
If you would like to use additional ISP settings, you have to enable this function and
configure this page. Some ISPs use this protocol for authentication purposes; if this is the
case, you need to enter:
User name: Enter the user name of your ISP account.
Password: Enter the password of your ISP account.
Retype password: Enter the password of your ISP account again to re-confirm.
Idle Time: Select the desired idle time: 5, 10, 15, 30, 60, 90, 120 minutes or no idle
timeout.
Some ISPs use a Host Name to authenticate the user; if this is the case, you need to enter:
Host Name: Enter the name of the gateway.
Some ISPs require you input the LAN card MAC address; if this is the case, you need to
enter:
MAC Address: Enter this LAN cards MAC address.
Note: Some ISPs may recognize your LAN card MAC address as a legal user. In this case,
you have to copy the LAN card MAC address in the MAC address field.
For Windows 95/98, you can run winipcfg to see the LAN card MAC address.
For Windows 2000/NT, you can run ipconfig/all to see the LAN card MAC address.