Filter
Top Products
66
Chapter 6 - RouteFinder Manager
Multi-Tech Systems, Inc. RouteFinder RF802EW User Guide
Remote Access Settings
1. From the General Settings dialog box, click the Remote Access radio button and
then click the Remote Access Settings button.
2. The Remote Access Settings dialog box displays.
Enter the following:
IP Assigned Method for Remote Clients - A remote client must have an IP
address to connect to the network. IP addresses may be assigned automatically
from a designated IP address pool using DHCP, or the IP address may be manually
assigned.
Assign an IP Address Automatically - The DHCP feature will issue the remote
site user an IP address automatically if the DHCP function is enabled. If DHCP is
disabled, the device will automatically search for a DHCP server and request an IP
address for the remote client.
Assign an IP address manually - Enter an IP address for the remote client.
Network Protocols - You must select the network protocols you would like to
enable for the dial-in service. The default enables both TCP/IP and IPS/SPX. If you
do not need both protocols, you may disable one of them. If you are connecting to
a Netware Server, IPX/SPX must be enabled.
IPX/SPX Frame Type - The RF802EW can automatically detect what kind of IPX/
SPX frame type you are using. You may manually select a frame type by using the
list box.