Filter
Top Products
113
Chapter 8 - LAN Client Settings
Multi-Tech Systems, Inc. RouteFinder RF802EW User Guide
Make Your New Connection (Unix Server Connection)
Windows 95/98:
1. Double-click My Computer.
2. Double-click the Dial-Up Networking folder.
3. Double-click Make New Connection (or Add New Connection, Win98).
4. Follow the on-screen instructions to configure your connection.
Windows NT:
1. Double-click My Computer.
2. Double-click Dial-Up Networking.
3. When the Dial-Up Networking dialog box opens, click Install.
4. Follow the on-screen instructions to configure your connection.
Set Dial-up type (Unix Server Connection)
Windows 95/98:
1. Right-click the newly created connection icon, then click Properties; the My
Connection dialog box opens.
2. On the General tab, click Server Type. The Server Types dialog box opens. Select
PPP: Windows 95, Windows NT 3.5, Internet.
3. Select only the Log on to network, Enable software compression, and TCP/IP
check boxes. Note: do not change any other items that are already selected.
Dial into your network (Unix Server Connection)
Windows 95/98:
1. You are ready to dial in to your network.
2. Double-click the new connection icon. The Connect To dialog box opens.
3. Enter the user name (if necessary) and password configured for you on the
RF802EW.
Note: If your particular situation permits, select the Save password check box.
4. Click Connect.
5. After connecting to the RF802EW, you can access the same services and resources
as if you were connected to the network locally.