Filter
Top Products
91
Chapter 7 - RouteFinder Monitor
Multi-Tech Systems, Inc. RouteFinder RF802EW User Guide
Status Tab
The Status tab provides information about the status of the WAN Ethernet and Async
ports.
1. From the RouteFinder Monitor dialog box, click the Status tab.
2. The Status tab information displays:
WAN Ethernet - This indicator light shows that either the IP Routing or the
Remote Access function is in use.
Async Port:
Modem Power - The indicator light is lit when the modem power is turned on.
Modem Ready - The Network Device sends a pre-initialization and initialization
command to the modem or ISDN TA. If this communication is successful, the
indicator light will be lit, indicating your modem is ready to make a connection.
Modem Connected - If the Network Device has detected that your modem has
successfully dialed up a connection to a remote site, the indicator light will be lit.
PPP Connected - After a connection is established, if the RouteFinder has detected
that the PPP connection is successful, this indicator light will be lit.
3. To exit RouteFinder Monitor, close the window.