Filter
Top Products
112
Chapter 8 - LAN Client Settings
Multi-Tech Systems, Inc. RouteFinder RF802EW User Guide
Accessing a Unix Server
Perform the following procedures to prepare your PC workstation to access a remote Unix
Server.
Adding the dial-up adapter (Unix Server Connection)
Windows 95/98/NT:
1. Click Start | Settings | Control Panel.
2. Double-click the Network icon to open the Network dialog box.
3. Click Add. The Select Network Component Type dialog box opens.
4. Select Adapter, then click Add. The Select Network adapters dialog box opens.
5. In the Manufacturers list, select Microsoft. In the Network Adapters list, select
Dial-up adapter.
6. Click OK twice to return to, and then close, the Network dialog box.
Windows NT:
Dial-up Networking adds PPP and SLIP protocol support, enabling your workstation to gain access to
a remote computer or network, even if your computer is not on a network.
1. Double-click My Computer, then double-click Dial-Up Networking. The following
message displays:
2. Click Install, then follow the on-screen instructions to configure your connection.
Adding TCP/IP (Unix Server Connection)
Windows 95/98/NT:
1. In the Network dialog box, Configuration tab, click Add.
2. Select Protocol and click Add.
3. The Select Network Protocol dialog box is displayed. In the Manufacturers list
[Win95 only], select Microsoft. In the Network Protocols list, select TCP/IP
[Win95/98] or TCP/IP Protocol [WinNT only].
[Note: Windows NT workstation has no Manufacturers list.]
4. Click OK twice to return to, and then close, the Network dialog box.
Set Up Properties of Components (Unix Server Connection)
Dial-up Adapter
Windows 95/98:
1. In the Network dialog box, Configuration tab, select the TCP/IP - Dial-up
adapter.
2. Click Properties. The TCP/IP Properties dialog box opens.
3. Ensure that Obtain an IP Address Automatically is selected. (Its the default.)
4. Click OK to close the TCP/IP Properties dialog box.
Note: You must restart your machines to enable the new settings.