Filter
Top Products
62
Chapter 6 - RouteFinder Manager
Multi-Tech Systems, Inc. RouteFinder RF802EW User Guide
Async Port
The Async Port can be configured to provide either IP Routing or Remote Access. IP
Routing is used to connect your network to another router through the Serial async
port. Remote Access allows remote users to dial-in to the device to access and share
network resources as if they were logged on to the network locally.
1. To configure the RF802EW for IP Routing, select IP Routing in the Async Port
section of the General Settings dialog box.
2. Click PPP Settings.
3. The IP Routing Settings dialog box displays.
IP Routing (NAT Enabled) - If NAT is enabled, all local users will be firewall
protected and will share one IP address through the Async port. Enter values in the
fields as described:
Tel Number - Enter the phone number required to access your ISP.
User Name - Enter the account user name to be authenticated by your ISP.
Password - Enter the user account password to be authenticated by your ISP.
Password Verification - Re-enter the user account password for verification.
External (Port) IP - Enter the fixed IP address provided by the remote site
System Administrator. If this address is automatically assigned by the remote site
DHCP server, enter 0.0.0.0
Assign Remote Site an IP Address - Check the box if you will specify the IP
Address of the remote site.
Remote IP Address - Enter the IP address the remote site will use.