71
Chapter 6 - RouteFinder Manager
Multi-Tech Systems, Inc. RouteFinder RF802EW User Guide
Writing a Login Script for IP Routing
To write an effective login script, you must obtain the correct login script information
from your ISP and become familiar with using the login script commands.
Every ISP has a unique login interface screen. Check with your ISP to determine how
your ISP requests information from you when using a PPP connection.
Note: You can create a simple dial-up connection to view your ISP interface log-in
screen using Dial-Up Networking in Windows 95, 98, NT or 2000.
Some common commands are:
Send and SH FUNCTION
Send ATZ Resets the Modem
Send ATDT 888-1234 Dials the phone number 888-1234
Send JaneDoe Types JaneDoe at the ISP interface
SH 1234 Types 1234 at the ISP interface but displays **** on
the RouteFinder monitor to hide the password.
Send Sends Enter (carriage return plus line feed) to the ISP
Wait FUNCTION
Wait 5 The Modem will wait for 5 seconds before moving to the
next line in the login script.
Wait CONNECT The Modem will wait for CONNECT to display before
moving to the next command.
Wait CONNECT 6 Modem will wait for CONNECT to display before
moving to the next command. If CONNECT does not
display, the modem will go to line 6 of the login script.
Other FUNCTION
Go Begins PPP
Jump4 Goes back to line 4 of the login script.
Hangup Hangs up the modem.
Example 1: Script for Normal Reliable ISP
# Login Script Meaning of Each Login Script Command
1 SendATZ Rests Modem
2 SendATS0 =1 Sends initial string ATS0 =1 to modem
3 SendATDT888-1234 Dial phone number 888-1234
4 WaitCONNECT Waits for ISP to send reply CONNECT
5 Waitusername: Waits for ISP to send reply username
6 SendJaneDoe Sends the user name JaneDoe to the ISP
7 Waitpassword Waits for ISP to send reply password
8 SH1234 Sends password 1234 to the ISP
9 Wait===> Waits for ISP to send reply ===>
10 Send1 Selects option 1 (PPP) for this ISP
11 Go Starts PPP mode
Example 2 : Script for Unreliable ISP (Redial until connected)
# Login Script Meaning of Each Login Script Command
1 SendATZ Resets Modem
2 SendATS0 =1 Sends initial string ATS0 =1 to modem
3 SendATDT8881234 Dials phone number 888-1234
4 WaitCONNECT2 Wait for ISP to send reply CONNECT. If no
CONNECT, returns to line 2 to re-dial.
5 Waitusername:12 Waits for ISP to send reply username. If no
response, goes to line 12.