Filter
Top Products
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
8-82 Switching Commands
202-10009-01_060204
Slot/Port The interface being displayed
Type Currently not used.
STP State The forwarding state of the port in the specified spanning tree
instance
Port Role The role of the specified port within the spanning tree.
Link Status The operational status of the link. Possible values are “Up” or
“Down”.
Link Trap The link trap configuration for the specified interface.
show spanning-tree mst summary
This command displays summary information about all multiple spanning tree instances in the
switch. On execution, the following details are displayed.
Format show spanning-tree mst summary
Mode Privileged EXEC and User EXEC
MST Instance ID List List of multiple spanning trees IDs currently configured.
For each MSTID:
Associated FIDs List of forwarding database identifiers associated with this
instance.
Associated VLANs List of VLAN IDs associated with this instance.
show spanning-tree summary
This command displays spanning tree settings and parameters for the switch. The following details
are displayed on execution of the command.
Format show spanning-tree summary
Mode Privileged EXEC and User EXEC
Spanning Tree Adminmode Enabled or disabled.
Spanning Tree Version Version of 802.1 currently supported (IEEE 802.1s, IEEE 802.1w,
or IEEE 802.1d) based upon the Force Protocol Version parame-
ter
Configuration Name TConfigured name.
Configuration Revision Level Configured value.