NETGEAR 7300 Series Switch User Manual


 
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
CLI Commands: Differentiated Services 10-25
202-10009-01_060204
Note: None of the counters listed here are guaranteed to be supported on all platforms. Only
supported counters are shown in the display output.
show service-policy
This command displays a summary of policy-oriented statistics information for all interfaces in the
specified direction. The direction parameter indicates the interface direction of interest.
This command enables or disables the route reflector client. A route reflector client relies on a
route reflector to re-advertise its routes to the entire AS. The possible values for this field are
enable and disable.
Format show service-policy [in | out]
Mode Privileged EXEC
The following information is repeated for each interface and direction (only
those interfaces configured with an attached policy are shown):
Interface The slot number and port number of the interface (slot/port).
Dir The traffic direction of this interface service, either in or out.
Operational Status The current operational status of this DiffServ service interface.
Offered Packets A count of the total number of packets offered to all class
instances in this service before their defined DiffServ treatment is
applied. These are overall per-interface per-direction counts.
Discarded Packets A count of the total number of packets discarded for all class
instances in this service for any reason due to DiffServ treatment.
These are overall per-interface per-direction counts.
Sent Packets A count of the total number of packets forwarded for all class
instances in this service after their defined DiffServ treatments
were applied. In this case, forwarding means the traffic stream
was passed to the next functional element in the data path, such as
the switching or routing function or an outbound link transmis-
sion element. These are overall per-interface per-direction counts.
Policy Name The name of the policy attached to the interface.
Note: None of the counters listed here are guaranteed to be supported on all platforms. Only
supported counters are shown in the display output.