NETGEAR 7300 Series Switch User Manual


 
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
IS CLI Mapping A-15
202-10009-01_060204
Routing config ip vlan routing create <vlan> VLAN
database
vlan routing <vlanid>
Routing config ip vlan routing delete <vlan> VLAN
database
no vlan routing <vlanid>
Routing config trapflags ospf <enable |
disable>
Router
OSPF
Config
trapflags
Router
OSPF
Config
no trapflags
Routing config router ospf adminmode
<enable | disable>
Router
OSPF
Config
enable
Router
OSPF
Config
no enable
Routing config router ospf asbr <enable |
disable>
Removed
Routing config router ospf prefrence <intra/
inter/type1/type2> <0-255>
Router
OSPF
Config
distance ospf {intra | inter | type1 |
type2} <1-255>
Router
OSPF
Config
no distance ospf {intra | inter | type1 |
type2}
Routing config router ospf interface areaid
<slot.prot> <areaid>
Interface
Config
ip ospf areaid <areaid>
Routing config router ospf interface
authentication <slot/port> <none /
simple> [key]
Interface
Config
ip ospf authentication {none | {simple
<key>} | {encrypt <key> <keyid>}}
Interface
Config
no ip ospf authentication
Table 13-2. IS CLI Mapping (continued)
Package 7300 Series L3 Switch Command
CLI Command
Mode Syntax