Filter
Top Products
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
IS CLI Mapping A-1
202-10009-01_060204
Appendix A
IS CLI Mapping
This chapter illustrates the mapping between CLI commands and the previous 7300 Series L3
Switch commands. The Package column indicates the 7300 Series L3 Switch package in which the
command is located.
Table 13-2. IS CLI Mapping
Package 7300 Series L3 Switch Command
CLI Command
Mode Syntax
QOS show acl detailed <aclid> Privileged
EXEC
show ip access-lists [<1-199>]
QOS show acl summary Privileged
EXEC and
User
EXEC
QOS config acl create <aclid> Global
Config
access-list {(<1-99> {deny | permit}
<srcip> <srcmask>) | ( {<100-199>
{deny | permit} {every | {{icmp | igmp |
ip | tcp | udp | <number>} <srcip>
<srcmask> [{eq {<0-65535> |
<portkey>} | range <startport>
<endport>}] <dstip> <dstmask> [{eq
{<0-65535> | <portkey>} | range
<startport> <endport>}] {[precedence
<precedence>] | [tos <tos>
<tosmask>] | [dscp <dscp>]}}}})}
QOS config acl delete <aclid> Global
Config
no access-list {<1-99> | <100-199>}
QOS config acl rule create <aclid>
<rulenum>
QOS config acl rule delete <aclid>
<rulenum>