NETGEAR 7300 Series Switch User Manual


 
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
9-56 Routing Commands
202-10009-01_060204
split-horizon
This command sets the RIP split horizon mode.
Default simple
Format
split-horizon {none | simple | poison}
Mode Router RIP Config
no split-horizon
This command sets the default RIP split horizon mode.
Format
no split-horizon
Mode Router RIP Config
trapflags
This command enables OSPF traps.
Default Enabled
Format
trapflags
Mode Router OSPF Config
no trapflags
This command disables OSPF traps.
Format
no trapflags
Mode Router OSPF Config
vlan routing
This command creates routing on a VLAN. The <vlanid> value has a range from 1 to 4094.
Format
vlan routing <vlanid>
Mode VLAN Database
no vlan routing
This command deletes routing on a VLAN. The <vlanid> value has a range from 1 to 4094.