NETGEAR 7300 Series Switch User Manual


 
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Command Line Interface Structure 5-1
202-10009-01_060204
Chapter 5
Command Line Interface Structure
The Command Line Interface (CLI) syntax, conventions and terminology are described in this
section. Each CLI command is illustrated using the structure outlined below.
CLI Command Format
Commands are followed by values, parameters, or both.
Example 1
network parms <ipaddr> <netmask> [<gateway>]
network parms is the command name.
<ipaddr> <netmask> are the required values for the command.
[<gateway>] is the optional value for the command.
Example 2
snmp-server location <loc>
snmp-server location is the command name.
<loc> is the required parameter for the command.
Example 3
clear vlan
clear vlan is the command name.
Command
The text in bold, non-italic font must be typed exactly as shown.