Filter
Top Products
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
8-98 Switching Commands
202-10009-01_060204
Default auto
Format dot1x port-control {force-unauthorized | force-authorized | auto}
Mode Interface Config
no dot1x port-control
This command sets the authentication mode to be used on the specified port to 'auto'.
Format no dot1x port-control
Mode
Interface Config
dot1x port-control All
This command sets the authentication mode to be used on all ports. The control mode may be one
of the following.
• force-unauthorized: The authenticator PAE unconditionally sets the controlled port to
unauthorized.
• force-authorized: The authenticator PAE unconditionally sets the controlled port to
authorized.
• auto: The authenticator PAE sets the controlled port mode to reflect the outcome of the
authentication exchanges between the supplicant, authenticator and the authentication server.
Default auto
Format dot1x port-control all {force-unauthorized | force-authorized |
auto}
Mode Global Config
no dot1x port-control All
This command sets the authentication mode to be used on all ports to 'auto'.
Format no dot1x port-control all
Mode
Global Config