User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
10-22 CLI Commands: Differentiated Services
202-10009-01_060204
Random Drop Maximum Drop Probability This field displays the RED maximum drop
probability.This is not displayed if the queue depth management
scheme is not RED.
Random Drop Sampling Rate This field displays the RED sampling rate.This is not dis-
played if the queue depth management scheme is not RED.
Random Drop Decay Exponent This field displays the RED decay exponent.This is not
displayed if the queue depth management scheme is not RED.
If the Policy Name is not specified this command displays a list of all defined DiffServ policies.
The following fields are displayed:
Policy Name The name of this policy. (Note that the order in which the policies
are displayed is not necessarily the same order in which they were
created.)
Policy Type The policy type, namely whether it is an inbound or outbound
policy definition.
Class Members List of all class names associated with this policy.
show diffserv service
This command displays policy service information for the specified interface and direction. The
<
slot/port> parameter specifies a valid slot number and port number for the system. The
direction parameter indicates the interface direction of interest.
Format
show diffserv service <slot/port> {in | out}
Mode Privileged EXEC
DiffServ Admin Mode The current setting of the DiffServ administrative mode. An
attached policy is only in effect on an interface while DiffServ is
in an enabled mode.
Interface The slot number and port number of the interface (slot/port).
Direction The traffic direction of this interface service, either in or out
Operational Status The current operational status of this DiffServ service interface.
Policy Name The name of the policy attached to the interface in the indicated
direction.
Policy Details Attached policy details, whose content is identical to that
described for the show policy-map <policymapname> command
(content not repeated here for brevity).