Filter
Top Products
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
9-46 Routing Commands
202-10009-01_060204
Exchange start - the first step in creating an adjacency between
the two neighboring routers, the goal is to decide which router is
the master and to decide upon the initial DD sequence number.
Exchange - the router is describing its entire link state database
by sending Database Description packets to the neighbor.
Loading - Link State Request packets are sent to the neighbor
asking for the more recent LSAs that have been discovered (but
not yet received) in the Exchange state.
Full - the neighboring routers are fully adjacent and they will now
appear in router-LSAs and network-LSAs.
Events The number of times this neighbor relationship has changed state,
or an error has occurred.
Permanence This variable displays the status of the entry, either dynamic or
permanent. This refers to how the neighbor became known.
Hellos Suppressed This indicates whether Hellos are being suppressed to the neigh-
bor. The types are enabled and disabled.
Retransmission Queue Length Is an integer representing the current length of the
retransmission queue of the specified neighbor router Id of the
specified interface.
show ip ospf neighbor brief
This command displays the OSPF neighbor table list. When a particular neighbor ID is specified,
detailed information about a neighbor is given. The information below will only be displayed if
OSPF is enabled.
Format
show ip ospf neighbor brief <slot/port | all>
Mode Privileged EXEC and User EXEC
Router ID Is 4 digit dotted decimal number representing the neighbor inter-
face.
IP Address Is an IP address representing the neighbor interface.
Neighbor Interface Index Is a slot/port identifying the neighbor interface index.
show ip ospf range
This command displays information about the area ranges for the specified <areaid>. The <areaid>
identifies the OSPF area whose ranges are being displayed.