Filter
Top Products
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
9-32 Routing Commands
202-10009-01_060204
Mode Global Config
no ip route distance
This command sets the default static route preference value in the router. Lower route preference
values are preferred when determining the best route.
Format
no ip route distance
Mode Global Config
ip routing
This command enables the IP Router Admin Mode for the master switch.
Format
ip routing
Mode Global Config
no ip routing
This command disables the IP Router Admin Mode for the master switch.
Format
no ip routing
Mode Global Config
redistribute
This command configures OSPF protocol to redistribute routes from the specified source protocol/
routers.
Default value for metric unspecified
Default value for type 2
Default value for tag 0
Format
redistribute {rip | bgp | static | connected} [metric
<0-16777215>] [metric-type {1 | 2}] [tag <0-
4294967295>] [subnets]
Mode Router OSPF Config