NETGEAR 7300 Series Switch User Manual


 
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Routing Commands 9-9
202-10009-01_060204
The format is 6 two-digit hexadecimal numbers that are separated by colons, for example
00:06:29:32:81:40.
Format
arp <ipaddress> <macaddr>
Mode
Global Config
no arp
This command deletes an ARP entry. The value for <arpentry> is the IP address of the interface.
The value for <ipaddress> is the IP address of a device on a subnet attached to an existing routing
interface. <macaddr> is a unicast MAC address for that device.
Format
no arp <ipaddress> <macaddr>
Mode Global Config
arp cachesize
This command configures the ARP cache size. The value for <cachesize> is a platform specific
integer value.
Format
arp cachesize <Platform specific integer value>
Mode Global Config
no arp cachesize
This command configures the default ARP cache size.
Format
no arp cachesize
Mode Global Config
arp dynamicrenew
This command enables ARP component to automatically renew ARP entries of type dynamic
when they age out.
Format
arp dynamicrenew
Mode Privileged Exec