Filter
Top Products
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Switching Commands 8-83
202-10009-01_060204
Configuration Digest Key Calculated value.
Configuration Format Selector Configured value.
MST Instances List of all multiple spanning tree instances configured on the
switch
show spanning-tree vlan
This command displays the association between a VLAN and a multiple spanning tree instance.
The <vlanid> corresponds to an existing VLAN ID.
Format show spanning-tree vlan <vlanid>
Mode Privileged EXEC and User EXEC
VLAN Identifier
Associated Instance Identifier for the associated multiple spanning tree instance or
"CST" if associated with the common and internal spanning tree
spanning-tree
This command sets the spanning-tree operational mode to enabled.
Default Disabled
Format spanning-tree
Mode Global Config
no spanning-tree
This command sets the spanning-tree operational mode to disabled. While disabled, the spanning-
tree configuration is retained and can be changed, but is not activated.
Format no spanning-tree
Mode Global Config
spanning-tree configuration name
This command sets the Configuration Identifier Name for use in identifying the configuration that
this switch is currently using. The <name> is a string of at most 32 characters.