NETGEAR 7300S Network Router User Manual


 
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
8-94 Switching Commands
202-10088-01, March 2005
clear ip dhcp binding
This command deletes an automatic address binding from the DHCP server database. If “*” is
specified, the bindings corresponding to all the addresses are deleted. <address> is a valid IP
address made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.
Default
none
Format clear ip dhcp binding {address | *}
Mode Privileged EXEC
clear ip dhcp server statistics
This command clears DHCP server statistics counters.
Format clear ip dhcp server statistics
Mode Privileged EXEC
clear ip dhcp conflict
The command is used to clear an address conflict from the DHCP Server database. The server
detects conflicts using a ping. DHCP server clears all conflicts If the asterisk (*) character is used
as the address parameter.
Default
none
Format clear ip dhcp conflict {<address> | *}
Mode Privileged EXEC
Provisioning (IEEE 802.1p) Commands
This chapter provides a detailed explanation of the Provisioning commands. The commands are
divided into two functional groups:
Show commands display switch settings, statistics, and other information.
Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration setting.