NETGEAR 7300S Network Router User Manual


 
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands 8-135
202-10088-01, March 2005
This command sets the Admin Hello Time parameter to a new value for the common and internal
spanning tree. The hellotime <value> is in whole seconds within a range of 1 to 10 with the value
being less than or equal to "(Bridge Max Age / 2) - 1".
Default 2
Format spanning-tree hello-time <1-10>
Mode Interface Config
no spanning-tree hello-time
This command sets the admin Hello Time parameter for the common and internal spanning tree to
the default value, i.e. 2.
Format no spanning-tree hello-time
Mode Interface Config
show spanning-tree
This command displays spanning tree settings for the common and internal spanning tree, when
the optional parameter “brief” is not included in the command. The following details are
displayed.
Format
show spanning-tree <brief>
Mode Privileged EXEC and User EXEC
Bridge Priority Configured value.
Bridge Identifier
Time Since Topology Change Time in seconds.
Topology Change Count Number of times changed.
Topology Change
Boolean value of the Topology Change parameter for the switch indicating if a
topology change is in progress on any port assigned to the common and internal
spanning tree.
Designated Root
Root Path Cost
Value of the Root Path Cost parameter for the common and internal spanning
tree.
Root Port Identifier
Root Port Max Age Derived value