NETGEAR 7300S Network Router User Manual


 
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Quality of Service (QoS) Commands 11-27
202-10088-01, March 2005
policy-map
This command establishes a new DiffServ policy. The <policyname> parameter is a case-sensitive
alphanumeric string from 1 to 31 characters uniquely identifying the policy. The type of policy is
specific to either the inbound or outbound traffic direction as indicated by the {
in | out} parameter.
Note: The policy type dictates which of the individual policy attribute commands are valid within
the policy definition.
Note: The CLI mode is changed to Policy-Map Config when this command is successfully
executed.
Format
policy-map <policyname> <in | out>
Mode Global Config
no policy-map
This command eliminates an existing DiffServ policy. The <policyname> parameter is the name
of an existing DiffServ policy. This command may be issued at any time; if the policy is currently
referenced by one or more interface service attachments, this deletion attempt shall fail.
Format
no policy-map <policyname>
Mode Global Config
policy-map rename
This command changes the name of a DiffServ policy. The <policyname> is the name of an
existing DiffServ class. The <
newpolicyname> parameter is a case-sensitive alphanumeric string
from 1 to 31 characters uniquely identifying the policy.
Format
policy-map rename <policyname> <newpolicyname>
Mode Global Config
randomdrop
This command changes the active queue depth management scheme from the default tail drop to
RED. The first two data parameters are the average queue depth minimum and maximum
threshold values specified in bytes. The minimum threshold is an integer from 1 to 250000. The
maximum threshold is an integer from 1 to 500000, but it must be equal to or greater than the
minimum threshold. The third data parameter is the maximum drop probability and is an integer
from 0 to 100. It indicates the percentage likelihood that a packet will be dropped when the
average queue depth reaches the maximum threshold value.