NETGEAR 7300S Network Router User Manual


 
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Security Commands 9-21
202-10088-01, March 2005
Number of configured servers The configured IP address of the authentication server
Max number of retransmits The configured value of the maximum number of times a
request packet is retransmitted
Timeout Duration The configured timeout value, in seconds, for request re-trans-
missions
Accounting Mode
Yes or No
If the optional token 'servers' is included, the following information regarding the configured
RADIUS servers is displayed.
IP Address IP Address of the configured RADIUS server
Port
The port in use by this server
Type Primary or secondary
Secret Configured Yes / No
Message Authenticator Enables or disables. the message authenticator attribute for the
selected server
show radius statistics
This command is used to display the statistics for RADIUS or configured server . To show the
configured RADIUS server statistic, the IP Address specified must match that of a previously
configured RADIUS server. On execution, the following fields are displayed.
Format show radius statistics [ipaddr]
Mode Privileged EXEC
If ip address is not specified than only Invalid Server Address field is displayed. Otherwise
other listed fields are displayed.
Invalid Server Addresses
The number of RADIUS Access-Response packets received from
unknown addresses.
Server IP Address IP Address of the Server.
Round Trip Time The time interval, in hundredths of a second, between the most recent Access-
Reply | Access-Challenge and the Access-Request that matched it from the
RADIUS authentication server.
Access Requests The number of RADIUS Access-Request packets sent to this
server. This number does not include retransmissions.