NETGEAR 7300S Network Router User Manual


 
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
IS CLI Mapping A-13
202-10088-01, March 2005
Routing config interface encaps <slot/port>
<ethernet/snap>
Interface
Config
encapsulation {<ethernet> | <snap>}
Routing config interface routing <slot/port>
<enable/disable>
Interface
Config
routing
Interface
Config
no routing
Routing config ip interface mtu <slot/port>
<576-1500>
Interface
Config
mtu <1522-9216>
Routing config ip interface netdirbcast <slot/
port> <enable/disable>
Interface
Config
ip netdirbcast
Interface
Config
no ip netdirbcast
Routing config ip interface create <slot/
port> <ipaddr> <subnetmask>
Global
Config
ip address <slot/port> <ipaddr>
<subnetmask>
Routing config ip forwarding <enable |
disable>
Global
Config
ip forwarding
Global
Config
no ip forwarding
Routing config routing <enable | disable> Global
Config
ip routing
Global
Config
no ip routing
Routing config ip vlan routing create <vlan> VLAN
database
vlan routing <vlanid>
Routing config ip vlan routing delete <vlan> VLAN
database
no vlan routing <vlanid>
Routing config router rip adminmode
<enable | disable>
Router
RIP
Config
enable
Table 12-3. IS CLI Mapping (continued)
Package
7300S Series L3 Switch
Command
CLI Command
Mode Syntax