Filter
Top Products
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
8-18 Switching Commands
202-10088-01, March 2005
Default 0
Format
session-timeout <0-160>
Mode Line Config
no session-timeout
This command sets the outbound telnet session timeout value to the default. The timeout value unit
of time is minutes.
Format
no session-timeout
Mode Line Config
bridge aging-time
This command configures the forwarding database address aging timeout in seconds. In an IVL
system, the [fdbid | all] parameter is required.
Default 300
Format
bridge aging-time <10-1,000,000> [fdbid | all]
Mode Global Config
Seconds The <seconds> parameter must be within the range of 10 to
1,000,000 seconds.
Forwarding Database ID Fdbid (Forwarding database ID) indicates which forwarding
database's aging timeout is being configured. The All option is used to configure all forwarding
database's agetime.
no bridge aging-time
This command sets the forwarding database address aging timeout to 300 seconds. In an IVL
system, the [fdbid | all] parameter is required.
Format
no bridge aging-time [fdbid | all]
Mode Global Config
Forwarding Database ID Fdbid (Forwarding database ID) indicates which forwarding
database's aging timeout is being configured. All is used to configure all forwarding database's
agetime.